Quantcast

Help with TeleMini v3.0 Can't see it on computer

The Rocketry Forum

Help Support The Rocketry Forum:

Ian Parker

New Member
Joined
Mar 30, 2019
Messages
4
Reaction score
0
Good morning all,
Just picked up a TeleMini v3.0 to replace an older board.
I can't seem to pick up the TeleMini via the TeleDongle.
I've set the call sign to N0CALL , tried scanning frequencies.
Tried setting the call sign to the serial number 3684
Any help appreciated. Spent 10 hours on this already.
Is there anyway of knowing if the TeleMini is working. I plug it in and no beeps or anything. Is that normal ?
TeleDongle is seen as 514 on COM14
For configuration, should TeleMini be plug in first or after clicking on configure altimeter ?
Is a new one set at 434.550 N0CALL ?
There are frequencies 0-9 and then a TeleDongle frequency 2147483.647 TeleDongle-v0.2 serial 514
Is there a default that should be used for first time setup ?
What order should I connect battery, TeleDongle, click Configure Altimeter ?
Should I be able to see a TeleDongle under windows ports ?
Lots of questions so hopefully your answers will help others too.
Thanks
Ian.
 

Ian Parker

New Member
Joined
Mar 30, 2019
Messages
4
Reaction score
0
Good morning all,
Just picked up a TeleMini v3.0 to replace an older board.
I can't seem to pick up the TeleMini via the TeleDongle.
I've set the call sign to N0CALL , tried scanning frequencies.
Tried setting the call sign to the serial number 3684
Any help appreciated. Spent 10 hours on this already.
Is there anyway of knowing if the TeleMini is working. I plug it in and no beeps or anything. Is that normal ?
TeleDongle is seen as 514 on COM14
For configuration, should TeleMini be plug in first or after clicking on configure altimeter ?
Is a new one set at 434.550 N0CALL ?
There are frequencies 0-9 and then a TeleDongle frequency 2147483.647 TeleDongle-v0.2 serial 514
Is there a default that should be used for first time setup ?
What order should I connect battery, TeleDongle, click Configure Altimeter ?
Should I be able to see a TeleDongle under windows ports ?
Lots of questions so hopefully your answers will help others too.
Thanks
Ian.
Good news. Alex advised you must short the switch for bench testing. Obvious when you know. :)
 
Top