Sold Hardware and Reloads

[Cl(VII)]

The cleanup continues (how did I get this much stuff). Today, I'm clearing out the extra motors and reloads that I don
t see flying in the immediate future. Shipping will likely be via UPS or FedEx ground and at actual cost, i.e. not included in prices below. RELOADS MUST BE PICKED UP IN PERSON. Payment by PayPal friends and family or cash if picking up. Note: these are personal goods, not Lab Rat Rocketry items, and thus will be to my personal PayPal account. PM interest and address so I can get you an accurate shipping quote. Priority will be in the order of PM received, unless someone takes a whole bunch and makes my life way easier (they jump the line within reason). Also, keep in mind it may take a day or two to get you that shipping quote. I have a couple broken ribs that are slowing me down a bit.

Note a few things are being sold as complete motors only, and are noted as such.

Case/Motor	Qty	Maker	Price
24/40 Motor - sold	2	AT	35 (Motor)
24/60 Motor - sold	1	AT	35 (Motor)
29/40-120 Motor - sold	2	AT	40 (Motor)
29/180 - sold	1	DR	25
29/240 - sold	1	AT	30
29/360 - sold	1	AT	35
38/240 - sold	1	AT	25
38/360 - sold	1	AT	30
38/480 - sold	1	MM	33
38/600 - sold	1	MM	35
38/720 - sold	1	AT	40
38/1080 - sold	1	AT	45
54/426 - sold	1	AT	70 (Motor)
54/852 - sold	1	MM	42
54/1280 - sold	1	AT	50
54/1706 - sold	1	AT	65
54/2560 - sold	1	DR	75
75/6400 - sold	1	AT	350 (motor)
Closure	Qty	Price
29-aft (gold) - sold	1	12
29-aft (silver) - sold	1	12
29-Seal Disk - sold	2	6
29-forward (red) - sold	1	13
38-aft (black) - sold	2	16
38-aft (gold) - sold	1	16
38-seal disk - both sold	2	7
38-forward (red) - sold	2	20
38-forward-plugged	1	20
38-forward-plugged-anchor - sold	1	20
38-forward-plugged-End Burn Style	1	20
38-forward-CJ-HEI-EXP and RAS ring explanation here - sold	1	30
54-aft (gold) - sold	2	22
54-aft (black - cosmetically ugly) - sold	1	15
54-aft-tailcone - sold	1	50
54-seal disk - sold	2	8
54-forward (black) - sold	1	25
54-forward-plugged-anchor - sold	1	30
54-forward-extended (red) - sold	1	30
54-forward-extended-plugged-anchor - sold	1	35
75-aft-tailcone - sold	1	60
Odd Items	Qty	Price
AT delay tool - sold	1	10
AT 24/29 aft closure tool (RMS Wrench) - sold	1	8
Knipex Snap Ring Plyers (16-60 mm) - sold	1	12
Loki Motors	Qty	Price
54/2800-42 nozzle-std forward - pending	1	180
38/1200-28+25 nozzles-std forward + plugged forward - sold	1	150
Reloads	Price
M1315W	225
K1103X-14A -  sold	75
J570W-14A - sold	50
I327DM-14A -  sold	40
H999N-P - sold	30
H97J-10A - sold	20
E18-4W (3 pack) -  sold	15
F24-4W (3 pack) -  sold	15
F39-6T (3 pack) -  sold	15
Opened Reloads AT24 Package Deal -  sold	Individual Reloads	Price for lot
E28-7T(5)	1	30
E28-4T(2)	1
F39-9T(6)	2
F24-4W	1
F24-7W	1
E11-3J(4)	1
F12-3J(2)	1
E18-7W	2

 

[3stoogesrocketry]

Private message sent

 

[DabCat]

I'll take the Dr rocket 29/180
the 2 Dr rocket 38mm forward closures and the 2 aft closures.
And the Dr rocket 2560.


Pm sent

 

[Cl(VII)]

I'm going to take some muscle relaxers and Tylenol 3 and try to get some sleep now (damn ribs). Don't get nervous if you don't get a response to your PM before tomorrow afternoon sometime. I will sit down with the spreadsheet and go through all the PMs then.

 

[tsmith1315]

PM sent on 38/1080.

 

[jmasterj]

PM sent on Loki 38/1200.

 

[Wayneb.warren]

The cleanup continues (how did I get this much stuff). Today, I'm clearing out the extra motors and reloads that I don
t see flying in the immediate future. Shipping will likely be via UPS or FedEx ground and at actual cost, i.e. not included in prices below. RELOADS MUST BE PICKED UP IN PERSON. Payment by PayPal friends and family or cash if picking up. Note: these are personal goods, not Lab Rat Rocketry items, and thus will be to my personal PayPal account. PM interest and address so I can get you an accurate shipping quote. Priority will be in the order of PM received, unless someone takes a whole bunch and makes my life way easier (they jump the line within reason). Also, keep in mind it may take a day or two to get you that shipping quote. I have a couple broken ribs that are slowing me down a bit.

Note a few things are being sold as complete motors only, and are noted as such.

Case/Motor	Qty	Maker	Price
24/40 Motor	2	AT	35 (Motor)
24/60 Motor	1	AT	35 (Motor)
29/40-120 Motor	2	AT	40 (Motor)
29/180	1	DR	25
29/240	1	AT	30
29/360	1	AT	35
38/240	1	AT	25
38/360	1	AT	30
38/480	1	MM	33
38/600	1	MM	35
38/720	1	AT	40
38/1080	1	AT	45
54/426	1	AT	70 (Motor)
54/852	1	MM	42
54/1280	1	AT	50
54/1706	1	AT	65
54/2560	1	DR	75
75/6400	1	AT	350 (motor)
Closure	Qty	Price
29-aft (gold)	1	12
29-aft (silver)	1	12
29-Seal Disk	2	6
29-forward (red)	1	13
38-aft (black)	2	16
38-aft (gold)	1	16
38-seal disk	2	7
38-forward (red)	2	20
38-forward-plugged	1	20
38-forward-plugged-anchor	1	20
38-forward-plugged-End Burn Style	1	20
38-forward-CJ-HEI-EXP	1	40
54-aft (gold)	2	22
54-aft (black - cosmetically ugly)	1	15
54-aft-tailcone	1	50
54-seal disk	2	8
54-forward (black)	1	25
54-forward-plugged-anchor	1	30
54-forward-extended (red)	1	30
54-forward-extended-plugged-anchor	1	35
75-aft-tailcone	1	60
Odd Items	Qty	Price
AT delay tool	1	10
AT 24/29 aft closure tool (RMS Wrench)	1	8
Knipex Snap Ring Plyers (16-60 mm)	1	12
Loki Motors	Qty	Price
54/2800-42 nozzle-std forward	1	180
38/1200-28+25 nozzles-std forward + plugged forward	1	150
Reloads	Price
M1315W	225
K1103X-14A	75
J570W-14A	50
I327DM-14A	40
H999N-P	30
H97J-10A	20
E18-4W (3 pack)	15
F24-4W (3 pack)	15
F39-6T (3 pack)	15
Opened Reloads AT24 Package Deal	Individual Reloads	Price for lot
E28-7T(5)	1	30
E28-4T(2)	1
F39-9T(6)	2
F24-4W	1
F24-7W	1
E11-3J(4)	1
F12-3J(2)	1
E18-7W	2

View attachment 534411

View attachment 534412

View attachment 534413

View attachment 534414

Would like the following items.
75 Alf tail one $60
knipex players $12
54 Alf tail one $50
2 54 seal disk $16
54 forward ext plug w/anchor $35

Be at Argonia most of the next ten days, so might be a day or so before I get back with you.

Wayne

 

[Wayneb.warren]

Cone not one on two line items.

 

[cerving]

Dang, if I had the money I would so grab that 75/6400 motor. I dinged a CTI 5G case last year... it was $300 by itself.

 

[cflytech]

I would like the following
54/426
54/852
54/1280
54/1706
29/240
I will PM you with address for shipping cost as well.
thanks

 

[waltr]

I'd like the
40/60 motor
29/240 case
29- aft & fwd closures
PM sent

 

[Neutronium95]

Sent PM about:
75/6400
54/2560

 

[Oldschool77]

If I lived closer I'd be all over those 24mm reloads!

 

[ayryq]

Sent PM for 24/40 & 24/60. Me too, wish I could pick up those 24mm reloads!

 

[cflytech]

I would like the following
54/426
54/852
54/1280
54/1706
29/240
I will PM you with address for shipping cost as well.
thanks

What email address so I can pay for the items. Also shipping cost.
Visalia CA, 93291. I will be out this moring until about 3:30 PM Thanks

 

[Jay Dub 4009]

Sent pm for 38/360 and for some closures

 

[maddmaxx11]

I sent a pm early today.

 

[Cl(VII)]

All PMs replied to, and availability updated in post 1.

 

[mrwalsh85]

Man, wish I was going to AF. I'd take a motor or two. Seems like none of the St Louis contingent is headed that way this year... A rarity!

 

[Maxitout]

PM sent on 38-240 case. Phil L.

 

[firemanup]

Are you going to be at Airfest? If not location for pick up on the motors?

 

[Cl(VII)]

Are you going to be at Airfest? If not location for pick up on the motors?

I won't be at Airfest as my schedule is booked up. Pickup location would be in Dallas area (Garland or Irving ideally).

 

[firemanup]

I won't be at Airfest as my schedule is booked up. Pickup location would be in Dallas area (Garland or Irving ideally).

Thanks Chris, was hoping on that M1315.

 

[Cl(VII)]

All caught up, and availability updated.

 

[Cl(VII)]

Thanks Chris, was hoping on that M1315.

I would have loved to be there, but with 2 kids and a wife who works in a school this time of year is nuts. Plus I just got back (broken) from a 5 day cycling trip, so best not to push luck further with spouse.

 

[techrat]

Let me know if ANY of the 29mm hardware is unsold. The 29/360 seems too big to fit in any of my rockets, but I'll take what I can get. Obviously, I would prefer something a little smaller to start with. That said, I had posted a "wanted" ad for 29mm hardware like 3 weeks ago and heard crickets, now I miss out by a few hours (sigh). That's life, I guess. Might have to buy new hardware, BMS has good prices, but would prefer to get something cheaper here, so keep me in the loop. I call second dibs!

 

[cflytech]

All caught up, and availability updated.

Hi Chris
I am home, what do I need to do to send payment for the hardware, Paypal? or something else.
I am new to the board, but have been build rockets for a couple of years now out here in CA..
Let me know I must have sent the email to the wrong address of something grab it. As I have not yet seen a replay.
thanks

Russ Beechinor
[email protected]
[email protected]

 

[Cl(VII)]

Hi Chris
I am home, what do I need to do to send payment for the hardware, Paypal? or something else.
I am new to the board, but have been build rockets for a couple of years now out here in CA..
Let me know I must have sent the email to the wrong address of something grab it. As I have not yet seen a replay.
thanks

Russ Beechinor
[email protected]
[email protected]

Russ,

I'm very sorry, but I wasn't keeping up with postings in the thread. For this sale, and most sales, people ask that you PM them. You can do that by hovering on our username to the left, and selecting "start conversation". This is very helpful when doing a sale as the messages appear by order received, so it is easy to see who has dibs on a given item. Unfortunately, everything you wanted is spoken for, but if it is any consolation, most of it was spoken for before your post last night. I will put you in line if the initial buyers fall through, and let you know if something falls to you.

Sorry for the confusion.

Chris

 

[Cl(VII)]

All boxed up and invoices sent. I'm done for the evening, so expect tracking numbers tomorrow on all paid orders.

Thanks all.

 

[BenCook]

I am looking at the photos and looking at the listings and I am slightly confused. I would like a 38mm plugged closure that has threads for bolting an eye on to or into a minimum diameter retainer. Do you have any of those left? If so I will take one.