All are either fine extruded or ultrafine isomolded. Most came from the Graphite Store.
Please PM and include your zip code so I can calculate shipping (not included). I charge actual USPS/UPS shipping.
Left to right, dimensions in inches. If you'd like other dimensions please PM me.
I also have two cracked nozzles for 75mm motors, free plus shipping; I wouldn't hesitate to use them on a single-use motor. Maybe even a reloadable. Cracks are very thin.
A: 2.12 (smaller diameter) x 7.2 (overall length, I didn't measure larger diameter), $20. SOLD
C: 1.69 x 3.5, size of the large portion. Stub wasn't measured but would be good for gripping in the chuck. $10.
F: 3.25 x 4.25, o.d. is rough, $20. SOLD
J: A partly-finished nozzle (not by me) for a butt-kicking motor. Never used. 3.4" o.d., 4.8" long overall, throat 1.25". Has grooves in the exit cone that will need to be sanded/machined out. $20.
Please PM and include your zip code so I can calculate shipping (not included). I charge actual USPS/UPS shipping.
Left to right, dimensions in inches. If you'd like other dimensions please PM me.
I also have two cracked nozzles for 75mm motors, free plus shipping; I wouldn't hesitate to use them on a single-use motor. Maybe even a reloadable. Cracks are very thin.
- 1.13 x 24, $50.
- 1.25 x 11.5, $25
- 1.38 x 12.5, $25 SOLD
- 1.4 x 15 $40 SOLD
- 1.96 x 2.6, free SOLD
- 2.25 x 11.7, $60 SOLD
- 3.3 and 2.6 diameter, 2.1" long overall; might be useful as a graphite insert for a large carrier. free.
A: 2.12 (smaller diameter) x 7.2 (overall length, I didn't measure larger diameter), $20. SOLD
C: 1.69 x 3.5, size of the large portion. Stub wasn't measured but would be good for gripping in the chuck. $10.
F: 3.25 x 4.25, o.d. is rough, $20. SOLD
J: A partly-finished nozzle (not by me) for a butt-kicking motor. Never used. 3.4" o.d., 4.8" long overall, throat 1.25". Has grooves in the exit cone that will need to be sanded/machined out. $20.
Last edited: