I'm not in the av-bay business per se but here is some 3D stuff I did with Featherweight Raven4+Tracker for 38 and 54 mm Nose cones. For the 54mm one, the Raven is mounted to the base of the 38mm Featherweight Av Bay. For the 38mm one, the base is the 14mm Featherweight Av Bay. I used those Av Bay parts because then it gives you terminals for the ejection charges. I have flown the 38mm one once already (J350 to about 9K feet) and have yet to fly the 54 mm one. With the Raven, it is 'mach immune' under thrust so I put vent holes in the nose cone just past the end of the coupler. I used small tapered screws from McMaster Carr to screw the nose cone to the coupler piece. For dual deploy from the nose cone I used a cable cutter for the main.
hmmm... the attachments are blank ... I may have to try again... ... yes working on it now... ok; I think this fixed the images...
View attachment 398806View attachment 398807View attachment 398808