Go devil 29 or 38

[RocketryBen]

Looking for a Go Devil 29 or 38. Not too much extra money around, but I'm looking into minimum diameter, and I saw these Go Devil rockets, but most websites have them as out of stock.
So, if you have one that you don't want, send me a PM!






Ben

 

[RocketryBen]

Wow, still nothing! Hmm...................



Ben

 

[dr wogz]

can't you clone / scratch one?

 

[RocketryBen]

can't you clone / scratch one?

Not very easily. Easier & probably cheaper to just buy the kit.



Thanks,

 

[Eric]

Good luck. I picked up the 29mm. Still looking for 38 and 54. I don't think many are just laying around.

 

[Evilash]

Did you check with AMW?

Sent from my SAMSUNG-SM-G935A using Rocketry Forum mobile app

 

[RocketryBen]

Did you check with AMW?

Sent from my SAMSUNG-SM-G935A using Rocketry Forum mobile app

They have the 38 version at AMW.
I have gotten word that those kits will soon be available again! :w:



Thanks,

 

[ksaves2]

They have the 38 version at AMW.
I have gotten word that those kits will soon be available again! :w:

Thanks,

If you want to fly the GD 38 with a Loki K motor, you need to get a longer sustainer tube. The stock tube is not long enough to accommodate. Kurt

 

[Cl(VII)]

If you want to fly the GD 38 with a Loki K motor, you need to get a longer sustainer tube. The stock tube is not long enough to accommodate. Kurt

It will work. I have done it.

https://www.rocketryforum.com/showt...-Leaned-to-Stop-Worrying-and-Love-3D-Printing

 

[RocketryBen]

If you want to fly the GD 38 with a Loki K motor, you need to get a longer sustainer tube. The stock tube is not long enough to accommodate. Kurt

It will work. I have done it.

https://www.rocketryforum.com/showt...-Leaned-to-Stop-Worrying-and-Love-3D-Printing

Thanks, guys! I just bought a hardware set for that motor! Sweet!


Thanks,

 

[ksaves2]

It will work. I have done it.

https://www.rocketryforum.com/showt...-Leaned-to-Stop-Worrying-and-Love-3D-Printing

It's a tight fit though. A couple of extra inches leaves room to cram a decent harness in. Fellow posted here of getting a longer "orange" colored tube for the GD38. Kurt

 

[Cl(VII)]

It's a tight fit though. A couple of extra inches leaves room to cram a decent harness in. Fellow posted here of getting a longer "orange" colored tube for the GD38. Kurt

Yes, definitely tight. Doable though

 

[claytonbirchenough]

Agreed, right but doable.