DJ Delorie
Well-Known Member
- Joined
- Apr 2, 2004
- Messages
- 221
- Reaction score
- 1
I just screwed up three glue joints in a row (body tube to coupler) because either the glue was setting WAY too fast, or the tubes were swelling and sticking. EIther way, that technique just isn't going to be usable when the replacement parts show up. Any suggestions for getting more working time, without seriously weakening the glue joint?
FYI it was yellow wood glue, which is what I usually use for this purpose.
FYI it was yellow wood glue, which is what I usually use for this purpose.