It's a bit hard to find on the aerotech web site, so I thought I'd provide some info on the delay kits for the new Aerotech G79W reload for the 29/120 case.
G79W-S Use RDK-03PLUS (about 6 seconds)
G79W-M Use RDK-05PLUS (about 10 seconds)
G79W-L Use RDK-07PLUS (about 14 seconds)
These came from Aerotech's latest RDK Instructions.
IMO, these delays are too long for a G motor. With these RDKs, AT has copied the delays for the H128 & H180 which have similar burn times as the G79 but with much greater total impulse.
I'd recommend that AT consider making the G79W-M delay be closer to 7 seconds.
-- Jim
P.S., FYI, the 29/120 case is incompatible with the consumer 29/40-120 case.
G79W-S Use RDK-03PLUS (about 6 seconds)
G79W-M Use RDK-05PLUS (about 10 seconds)
G79W-L Use RDK-07PLUS (about 14 seconds)
These came from Aerotech's latest RDK Instructions.
IMO, these delays are too long for a G motor. With these RDKs, AT has copied the delays for the H128 & H180 which have similar burn times as the G79 but with much greater total impulse.
I'd recommend that AT consider making the G79W-M delay be closer to 7 seconds.
-- Jim
P.S., FYI, the 29/120 case is incompatible with the consumer 29/40-120 case.