Quantcast

Forged eye-bolts to fit 98mm tapped forward closure?

The Rocketry Forum

Help Support The Rocketry Forum:

gizza2

Well-Known Member
Joined
Feb 1, 2009
Messages
94
Reaction score
0
I'm not sure why www.rouse-tech.com doesn't publish this but... where can one buy forged eye-bolts to fit their 75/98mm tapped forward closures (3/8"-16)? I've found some on www.fastenal.com and www.boltdepot.com but they're all too long with 1.25" being the shortest. I'm quite certain the tap depth is only ~3/4" and yes I could just add nuts to the top but I want the sweet bolt shown on their site (back, left of bottom image):

http://www.rouse-tech.com/monstermotors.htm

I e-mailed Tom Rouse directly but received no response. Thanks in advance for your suggestions.
 

AHansom

Well-Known Member
Joined
Jan 22, 2009
Messages
783
Reaction score
20
Here is another place to get them


http://www.bosunsupplies.com/produc...bosunsupplies.com/products2.cfm?product=T0570
 
Last edited:

AHansom

Well-Known Member
Joined
Jan 22, 2009
Messages
783
Reaction score
20
I know isn't it funny how everything is more expensive if you say it is for a boat:boat:
 
Last edited:

gizza2

Well-Known Member
Joined
Feb 1, 2009
Messages
94
Reaction score
0
You guys... are awesome! Thanks much.
 
Top