- Joined
- Jan 17, 2009
- Messages
- 15,468
- Reaction score
- 232
As came up in a LPR thread, FlisKits is working on a pair of payload kits for release in mid-late december. We would like to have them in time for the holidays, but at this point, I can't promise *any*thing, not even the NARAM photo album (that one was for you Scott... )
We haven't named them yet, but here they are:
Payloader #1: Three 18mm cluster, standing 23.2" tall, 5" clear payload section that is based on our (soon to be announced) CPT-63 tube that is 1.812" OD. The three motor tubes are housed inside a BT-60 with an adapter *up* to the payload tube.
Payloader #2: Three 24mm cluster, standing 42.125" tall, 10" clear CPT-63 payload tube. The three motor tubes are housed inside a BT-70 with an adapter *down* to the payload tube.
The attached image shows them both, to scale, side by side, profile and end view.
The biggest contraint at this point is time to get the documentation in place as I finish up the Alien8 and several accessory parts.
jim
We haven't named them yet, but here they are:
Payloader #1: Three 18mm cluster, standing 23.2" tall, 5" clear payload section that is based on our (soon to be announced) CPT-63 tube that is 1.812" OD. The three motor tubes are housed inside a BT-60 with an adapter *up* to the payload tube.
Payloader #2: Three 24mm cluster, standing 42.125" tall, 10" clear CPT-63 payload tube. The three motor tubes are housed inside a BT-70 with an adapter *down* to the payload tube.
The attached image shows them both, to scale, side by side, profile and end view.
The biggest contraint at this point is time to get the documentation in place as I finish up the Alien8 and several accessory parts.
jim