Fore Check
Well-Known Member
- Joined
- Sep 24, 2010
- Messages
- 4,263
- Reaction score
- 9
I'm about to start finishing/smoothing my first set of plywood fins. I have no experience with plywood fins - always have used balsa or plastic. Any recommendations for sealing and finishing? Is the balsa filler stuff the way to go? "Dry rubbing" with carpenter's filler?
I appreciate your suggestions. These are 1/8" 5-ply birch plywood fins.
I appreciate your suggestions. These are 1/8" 5-ply birch plywood fins.