SERG3ANTGUTTER
New Member
- Joined
- May 24, 2020
- Messages
- 2
- Reaction score
- 0
Hey guys
Getting ready to start building and putting together my level 2 HPR certification rocket. Doing it on a Public Missles Endeavor kit with a K160 motor. Will be injecting epoxy for those internal fin fillets and adding a extra centering ring cause the K motor is pushing it.
Planning to have an onboard go pro camera. Really wanna capture the awesome ride up but worried about the rocket spin making the footage nauseating.
I did some looking around and ran into fin beveling.
Any advice where to bevel the fins to counter or minimize the spin? About how many degrees?
Working with a split fin design and 0.06" thick G10 fiberglass fins
Getting ready to start building and putting together my level 2 HPR certification rocket. Doing it on a Public Missles Endeavor kit with a K160 motor. Will be injecting epoxy for those internal fin fillets and adding a extra centering ring cause the K motor is pushing it.
Planning to have an onboard go pro camera. Really wanna capture the awesome ride up but worried about the rocket spin making the footage nauseating.
I did some looking around and ran into fin beveling.
Any advice where to bevel the fins to counter or minimize the spin? About how many degrees?
Working with a split fin design and 0.06" thick G10 fiberglass fins