- Joined
- Jan 30, 2009
- Messages
- 2,449
- Reaction score
- 2,132
Hey everyone, I built this Farside-X clone stock like the directions. But the all-up weight without motors or recovery system as you see it here is right at 4oz. The plans also suggest an additional 1 1/2oz. for payload to the third stage for stability. This would maybe push the weight close to 6oz. without even the motors. Would this be too much weight for the C6-0 booster motor in a 3-stage liftoff? Anyone have any experience with one of these? I was wondering if I should build another first stage with 24mm mount instead of the 18mm. Any suggestions appreciated!