- Joined
- Jan 10, 2012
- Messages
- 68
- Reaction score
- 13
I am reducing my inventory of experimental motors and chemicals. A little xtra space will make the wife happy. Items for delivery at BALLS 30. There are two options for making a purchase:
1. Make a 25% deposit in advance to guarantee your order. There is limited, high demand, chemicals, casting sets and hardware available. Deposit refundable if requested by 9/21.
2. Come by and purchase
If you’re interested in some items, please notify me and I’ll will forward additional contact info. Anything not sold at BALLS, I’ll list on Rocketry Forum. Part 2 items listed next week.
CHEMICALS
(1 gallon) R45 M
Cost: $125
(10 lbs) AP 200
Cost: $125
(20 lbs) AP 200
Source: RCS
Cost: $300
(50 lbs) AP 400
Cost: 10 lbs/$125
(5 lbs) Al 500 mesh
Cost: $50
(5 lbs) Al 500 mesh
Cost: $50
(4 lbs) Mg 325 mesh
Cost: $75
MOTOR CASES (98mm and 4”)
All machined from 4.0” OD by 3.5” ID 6061 aluminum tube with groves for snap rings. Wall thickness of 98mm tubes is .175”. Tubes compatible with Always Ready Rocketry casting sets and possible other. Check picture with items listed from left to right.
1. 18.6 x 4”
Price: $50
2. 18.5” x 98mm with thrust ring
Price: $75
3. 36.5” x 98mm with thrust ring
Price: $150
4. 36.7” x 4”
Price: $125
54 and 98MM/4” STANDARD MOTOR CASTING SET (phenolic liner + paper casting tube)
Standard 54mm and 98 mm sets were purchased from Always Ready Rocketry – check site for specs. All liners and tubes are 48” long
54mm
Quantity: 10
Price/set: $20
98mm/4”
Quantity: 5
Price/set: $35
98MM HIGH TEMPERATURE/LONG BURN CASTING SET (phenolic liner + paper tube)
Liner: 3.47” OD x 3.30” ID
Tube: Same as standard set
Quantity:
Price/set: $50
5” CUSTOM CASTING SET (phenolic liner + paper tube)
Liner: 4.475" OD X 4.254" ID
Tube: 4.239" OD 4.125" ID "
Quantity: 6
Price/set: $50
5” High Temperature/Long Burn Set (phenolic liner + phenolic tube)
Liner: 4.47” OD x 4.26 ID
Tube: 4.24” OD x 4.11” ID
Quantity: 2
Price/set: $60
KOSDON MOTOR CASE
54mm x 1040
Quantity: 2
Price: $40/ea
54mm x 1400
Quantity: 1
Price: $50
ROCKET
SPECIFICATIONS
Length: 108.25”
Width: 5.6”
Weight (net): 385 oz
Price: $300
1. Make a 25% deposit in advance to guarantee your order. There is limited, high demand, chemicals, casting sets and hardware available. Deposit refundable if requested by 9/21.
2. Come by and purchase
If you’re interested in some items, please notify me and I’ll will forward additional contact info. Anything not sold at BALLS, I’ll list on Rocketry Forum. Part 2 items listed next week.
CHEMICALS
(1 gallon) R45 M
Cost: $125
(10 lbs) AP 200
Cost: $125
(20 lbs) AP 200
Source: RCS
Cost: $300
(50 lbs) AP 400
Cost: 10 lbs/$125
(5 lbs) Al 500 mesh
Cost: $50
(5 lbs) Al 500 mesh
Cost: $50
(4 lbs) Mg 325 mesh
Cost: $75
MOTOR CASES (98mm and 4”)
All machined from 4.0” OD by 3.5” ID 6061 aluminum tube with groves for snap rings. Wall thickness of 98mm tubes is .175”. Tubes compatible with Always Ready Rocketry casting sets and possible other. Check picture with items listed from left to right.
1. 18.6 x 4”
Price: $50
2. 18.5” x 98mm with thrust ring
Price: $75
3. 36.5” x 98mm with thrust ring
Price: $150
4. 36.7” x 4”
Price: $125
54 and 98MM/4” STANDARD MOTOR CASTING SET (phenolic liner + paper casting tube)
Standard 54mm and 98 mm sets were purchased from Always Ready Rocketry – check site for specs. All liners and tubes are 48” long
54mm
Quantity: 10
Price/set: $20
98mm/4”
Quantity: 5
Price/set: $35
98MM HIGH TEMPERATURE/LONG BURN CASTING SET (phenolic liner + paper tube)
Liner: 3.47” OD x 3.30” ID
Tube: Same as standard set
Quantity:
Price/set: $50
5” CUSTOM CASTING SET (phenolic liner + paper tube)
Liner: 4.475" OD X 4.254" ID
Tube: 4.239" OD 4.125" ID "
Quantity: 6
Price/set: $50
5” High Temperature/Long Burn Set (phenolic liner + phenolic tube)
Liner: 4.47” OD x 4.26 ID
Tube: 4.24” OD x 4.11” ID
Quantity: 2
Price/set: $60
KOSDON MOTOR CASE
54mm x 1040
Quantity: 2
Price: $40/ea
54mm x 1400
Quantity: 1
Price: $50
ROCKET
SPECIFICATIONS
Length: 108.25”
Width: 5.6”
Weight (net): 385 oz
Price: $300
