• If you have bought, sold or gained information from our Classifieds, please donate to Rocketry Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Estes Bandit (K-48) Fin Measurments

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

K'Tesh

.....OpenRocket's ..... "Chuck Norris"
TRF Supporter
Joined
Mar 27, 2013
Messages
22,446
Reaction score
14,747
I've found the .tif file with the fin on JimZ's site... Problem is, there's no ruler, or any indication of size.

I've entered in the values I obtained from it. Now if I could just get the root edge, I'd be able to scale it properly, and the file would be finished.



If someone could scan theirs with a ruler (.png @ 600 Dpi preferred), I'd greatly appreciate it.

Thanks!
Jim
 
Last edited:
JIC someone is curious... Yes, my .ork file will include the way I simulated the vents in that image above.

I'm unable to simulate the notches that are taken out of the fwd CR though.
 
Back
Top