Quantcast

Entacore AIM XTRA 2.0 - Telemetry and 4 Output Altimeter with Base - $325

The Rocketry Forum

Help Support The Rocketry Forum:

patelldp

Well-Known Member
Joined
Jan 23, 2009
Messages
5,647
Reaction score
86
The Entacore AIM XTRA 2.0 is an outstanding altimeter with integrated telemetry. Product specifications can be found here: https://entacore.com/electronics/aimxtra

I am including the following:

- AIM XTRA 2.0 Altimeter, flown 4-5 times and in perfect working condition with most recent firmware
- BASE 1.1 Receiver with integral USB cord
- 1000 mAh LiPo with JST plug (will throw in a pair of Female JST connectors, not shown)(originally from Sparkfun: https://www.sparkfun.com/products/retired/10472)
- Two helical antennas for the AIM XTRA
- SMA Female to Male 6" extension
- #4 Mounting Hardware - Nylon
- 2x 3d printed sleds (pics in posts below)
- Missing: 1x rubberized quater wave antenna for AIM BASE

This all retails for ~$430, I am asking $325 shipped. I will also trade the above for a Telemetrum and Teledongle.

PM with interest. Thanks for looking!



 
Last edited:

Solarover12

Well-Known Member
Joined
Dec 19, 2014
Messages
283
Reaction score
1
Interested, but what's the dimensions? I couldn't find anything on the site.

Thanks!
 

patelldp

Well-Known Member
Joined
Jan 23, 2009
Messages
5,647
Reaction score
86
4.315" L x 1.18" W, not including antenna.

Edited: 1.18" wide, not 1.8". Fits in 38mm tube.
 
Last edited:

Solarover12

Well-Known Member
Joined
Dec 19, 2014
Messages
283
Reaction score
1
Thanks! But the dimensions are a bit off for what I need.
 

patelldp

Well-Known Member
Joined
Jan 23, 2009
Messages
5,647
Reaction score
86
Still available. As stated, I am open to trading for a Telemetrum. This will gain you additional data recording and two additional output channels. If you have a Telemetrum and want to swap, I am sure we can work something out.
 

patelldp

Well-Known Member
Joined
Jan 23, 2009
Messages
5,647
Reaction score
86
What if I toss in some 3D printed sleds? Designed to fit 54mm and 4" couplers.

ImageUploadedByRocketry Forum1490224858.279334.jpg

ImageUploadedByRocketry Forum1490224912.878216.jpg
 

patelldp

Well-Known Member
Joined
Jan 23, 2009
Messages
5,647
Reaction score
86
Reduced. $325 including the 3D printed sleds with free shipping. I'll hold on to it if there's no interest.
 
Top