Ejection charge pod

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Scott Nokes

Well-Known Member
Joined
Jan 26, 2020
Messages
177
Reaction score
23
Hello everyone please can you show me what you use as an ejection charge pod.
Thank you
 
My black brandt is 4 inch diameter, can I use these a ejection wells, thank you
 

Attachments

  • Screenshot_20210423-102455_Chrome.jpg
    Screenshot_20210423-102455_Chrome.jpg
    44.7 KB · Views: 44
I was thinking of drool a holler fort a small bolt in the base and go through there centering ring with a washer and lock nut in the other side
 
I can send you 10 - 3D printed ones to try if you are interested. They are 1 gram canisters. I just ask for shipping.
 
I use these https://ronaldhatcher.com/post/charge-well/
blk-19.jpeg
 
https://smile.amazon.com/gp/product/B07P7GCBM7/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
$9 for 200 canisters. They free-float so you can use the same set up on all av-bays

Drill a very small hole at the bottom and feed in your ematch. Drop of CA or other glue to seal the bottom. Fill with up to 3g of 4F BP. Take up any unused space with wadding and close the top. Tape the top with vinyl tape (aka electrical tape) and attach to the bulkhead connectors. (bolts through the bulkhead)
 
Back
Top