Ejection charge pod

The Rocketry Forum

Help Support The Rocketry Forum:

Scott Nokes

Well-Known Member
Joined
Jan 26, 2020
Messages
49
Reaction score
1
Hello everyone please can you show me what you use as an ejection charge pod.
Thank you
 

teepot

Well-Known Member
TRF Supporter
Joined
Dec 8, 2019
Messages
1,117
Reaction score
689
Location
Pahrump, Nevada
I don't see why not. My question is how will you attach it to the av bay?
 

Scott Nokes

Well-Known Member
Joined
Jan 26, 2020
Messages
49
Reaction score
1
I was thinking of drool a holler fort a small bolt in the base and go through there centering ring with a washer and lock nut in the other side
 

cwbullet

Obsessed with Rocketry
Staff member
Administrator
TRF Lifetime Supporter
Global Mod
Joined
Jan 24, 2009
Messages
26,974
Reaction score
4,465
Location
Glennville, GA
I can send you 10 - 3D printed ones to try if you are interested. They are 1 gram canisters. I just ask for shipping.
 

heada

Well-Known Member
Joined
Jan 18, 2009
Messages
4,111
Reaction score
1,257
Location
Indianapolis, Indiana

$9 for 200 canisters. They free-float so you can use the same set up on all av-bays

Drill a very small hole at the bottom and feed in your ematch. Drop of CA or other glue to seal the bottom. Fill with up to 3g of 4F BP. Take up any unused space with wadding and close the top. Tape the top with vinyl tape (aka electrical tape) and attach to the bulkhead connectors. (bolts through the bulkhead)
 
Top