Lowpuller
Well-Known Member
- Joined
- Nov 22, 2013
- Messages
- 2,230
- Reaction score
- 26
I am building a Dual Deploy Twitch for my Level 2 Cert. flight, build thread possibly to follow, but a lot of you guys are putting out some pretty spectacular build threads. I'm even hesitant to try this one but here it goes.
I plan on using redundant altimeters a Missile Works RRC2 and the Eggtimer TRS.
Frankly I've been looking at Eggtimer products for a while but was afraid they might be too complicated for my skill set but after reading the instructions multiple times and many other threads as well as talking to Chris, I have decided to give it a try. You may have even seen my soldering iron thread all related to this project.
So here is what I got in the mail after consulting with Chris on my needs, absolutely amazing customer service and politely answering my many questions.
And here are the tools I've gathered or purchased to help make this project a success.
And my newest and now most favorite tool!
My soldering skills are fair but I have never done anything this small. I have paid close attention to the instructions and tried to obtain the right tools for the job.
I put what I hope is the final paint on the rocket tonight so the only thing left is the AV Bay. I know some folks have built these projects in a couple of hours but I suspect this will take me at least a couple of weeks based on available time and patience.
I plan on using redundant altimeters a Missile Works RRC2 and the Eggtimer TRS.
Frankly I've been looking at Eggtimer products for a while but was afraid they might be too complicated for my skill set but after reading the instructions multiple times and many other threads as well as talking to Chris, I have decided to give it a try. You may have even seen my soldering iron thread all related to this project.
So here is what I got in the mail after consulting with Chris on my needs, absolutely amazing customer service and politely answering my many questions.
And here are the tools I've gathered or purchased to help make this project a success.
And my newest and now most favorite tool!
My soldering skills are fair but I have never done anything this small. I have paid close attention to the instructions and tried to obtain the right tools for the job.
I put what I hope is the final paint on the rocket tonight so the only thing left is the AV Bay. I know some folks have built these projects in a couple of hours but I suspect this will take me at least a couple of weeks based on available time and patience.