Eggtimer Quantum Auto Arming not working

[Scott C]

@cerving sorry to bug you again, I was the one who needed 2 KSH122 Transistors, But I wanted to have this particular issue in the TRF for anyone else who might have the same problem.
The good news is the transistors fixed the problem I was having BUT For some reason I can not get the Auto Arming to work on my 2 Quantums. It will beep every 5 seconds then after 60 sec, it will have a continuous tone indicating a problem. It works properly when doing test fires and when I simulate a flight.

Thanks again,
Scott

 

[rharshberger]

Sorry to criticize but the thread title almost sounds like the units are arming themselves.

 

[Scott C]

Sorry to criticize but the thread title almost sounds like the units are arming themselves.

It does sound that way. Thanks for pointing that out.

 

[cerving]

Do you see continuity on the enabled channels? If you don't then it won't arm.

 

[Scott C]

Do you see continuity on the enabled channels? If you don't then it won't arm.

Yes. Everything works perfectly other than auto arm.

 

[cerving]

Please upload the latest firmware from the web site, 1.07D... that should take care of your problem.

 

[Scott C]

Works perfectly now! Thanks again Cris.