Quantcast

Eggtimer Quantum Auto Arming not working

The Rocketry Forum

Help Support The Rocketry Forum:

Rocket Outlaw

Member
Joined
Jul 26, 2020
Messages
13
Reaction score
3
Location
Kokomo, Indiana
@cerving sorry to bug you again, I was the one who needed 2 KSH122 Transistors, But I wanted to have this particular issue in the TRF for anyone else who might have the same problem.
The good news is the transistors fixed the problem I was having BUT For some reason I can not get the Auto Arming to work on my 2 Quantums. It will beep every 5 seconds then after 60 sec, it will have a continuous tone indicating a problem. It works properly when doing test fires and when I simulate a flight.

Thanks again,
Scott
 

rharshberger

Well-Known Member
Joined
Oct 13, 2014
Messages
9,672
Reaction score
1,664
Location
Pasco, WA
Sorry to criticize but the thread title almost sounds like the units are arming themselves.
 

cerving

Owner, Eggtimer Rocketry
TRF Sponsor
TRF Supporter
Joined
Feb 3, 2012
Messages
3,887
Reaction score
1,084
Do you see continuity on the enabled channels? If you don't then it won't arm.
 

cerving

Owner, Eggtimer Rocketry
TRF Sponsor
TRF Supporter
Joined
Feb 3, 2012
Messages
3,887
Reaction score
1,084
Please upload the latest firmware from the web site, 1.07D... that should take care of your problem.
 
Top