I designed these as a permanent and removeable solution to mount the Eggfinder Apogee Altimeter in a 4" LOC nose cone. Several have written about making some of these for sale and I have them available for $20 each plus $8 shipping via Priority Mail (Domestic/APO/Territories).
These are designed to be used with the 3D printed mounting kit that Eggfinder sells and a standard 4" LOC nose cone. I am not sure if they will fit other 4" nose cones. You can read about how I implemented this kit here.
The kit comes as shown below. Made of 3/8" 7 ply baltic birch plywood and comes with 3 Tee Nuts and cap head screws and 3 brass screws as a back up for the epoxy in securing it to the nose cone. They are precision milled to very tight tolerances on a CNC router.
Thanks for looking.
These are designed to be used with the 3D printed mounting kit that Eggfinder sells and a standard 4" LOC nose cone. I am not sure if they will fit other 4" nose cones. You can read about how I implemented this kit here.
The kit comes as shown below. Made of 3/8" 7 ply baltic birch plywood and comes with 3 Tee Nuts and cap head screws and 3 brass screws as a back up for the epoxy in securing it to the nose cone. They are precision milled to very tight tolerances on a CNC router.
Thanks for looking.