The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Scott Chase

Fly29mm
Joined
Dec 4, 2019
Messages
176
Reaction score
28
Location
Cape Coral
kit.jpg You Can skip to the completed Dragon just scroll to the bottom of this post.
Really thin paper tubes, Estes 29mm Motor retainer, All wood from Rocketry Works. The wood is really strong. The Motor mount wood easily withstands F67-9W this fairly new motor is a beast in the F class that can be shipped with no hazmat fee.
29mm retainer back view.jpg
The fins are super strong no warping sealed with regular Rust-oleum white primer. A can an 1/2 was used
to prime the rocket,sanding between coats with 1000 grit sandpaper.
fin alignment.jpg
Side view of the Rocketry Works Trap Fin. Mounting was just a matter of centering the fin in the ttw Tube. adhesive Gorilla 6 minute epoxy.
 

Attachments

  • Dragon Complete.jpg
    Dragon Complete.jpg
    41.5 KB · Views: 70
  • Dragon Complete.jpg
    Dragon Complete.jpg
    41.5 KB · Views: 70
Last edited:
Back
Top