Discounts on Carbon Fiber Sleeves, Kevlar Sleeves, and Fiberglass Sleeves!

Robin Soller

Member
Joined
Jan 16, 2005
Messages
21
Reaction score
0
Soller Composites (www.sollercomposites.com) is please to announce discounts for Rocketry Forum members on all of its composites sleeve products:

Carbon Fiber sleeves: 0.09 inch diameter to 24 inch diameter sleeves
Kevlar Sleeves: 0.09 inch diameter to 3.5 inch diameter sleeves
Fiberglass Sleeves: 0.09 inch diameter to 26 inch diameter sleeves
Carbon/Kevlar Hybrid Sleeves 0.14 inch diameter to 3.5 inch diameter sleeves

Soller Composites is a direct factory sleeve distributor with extremely low prices!
All Rocketry Forum members can buy any sleeve type starting at the “30ft price”
no matter how much you buy. Buy on-line 24hr/day at: https://www.sollerpaddles.com/composites/carbon fiber sleeves.html

This offer ends Jan 31st 2004.

We also sell all-weather (non-yellowing) epoxy Kits, composite fabric (Twill, Harness-Satin, colored carbon fiber, plain weaves), vac bagging and other products/supplies.

Thank you,

Jon Soller
Owner
Soller Composites
www.sollercomposites.com
603 744 8955
 

Manwithbeers

Well-Known Member
Joined
Jan 7, 2004
Messages
283
Reaction score
0
Hmmm, Would thier 1/2 inch Dia. Kevlar sleeve make good HP Shock cord? Or maybe a slightly larger Dia would make a good shock cord protector.

Layne
 

Robin Soller

Member
Joined
Jan 16, 2005
Messages
21
Reaction score
0
We actually do make shock cords (bungee cords). Check out ebay item# 7948110641 or this link may work: https://cgi.ebay.com/ebaymotors/ws/...&item=7948110641&rd=1&sspagename=STRK:MESE:IT for an example of what they look like...

I don't know what "HP" is but all the sleeves work like a Chinese fingertrap (they expand in width when the ends are pushed together, or contract in width when the ends are pulled). We use these same sleeves to make both shock cords and composite shafts!

BTW - The 3/4inch Kevlar Sleeves make great shock cords protectors for 3/8 inch diameter shock cords. Add about 1/4inch to the diameter of the shock cord for the kevlar sleeve size you should use as a protector, then add about 20-30% more length to the kevlar sleeve than the actual shock cord length.

Thank you!

Jon Soller
Owner
Soller Composites
www.sollercomposites.com
603 744 8955
 

xenon

Well-Known Member
Joined
Jan 25, 2009
Messages
701
Reaction score
0
what would 16" and 24" light and heavy carbon sleeves cost?
 

rocketsonly

Well-Known Member
Joined
Apr 7, 2004
Messages
881
Reaction score
0
Just ordered some fabric! I'll let you guys know what happens. So far Jon has been VERY quick with his email respones!
 

rocketsonly

Well-Known Member
Joined
Apr 7, 2004
Messages
881
Reaction score
0
Well, I received the stuff a few days ago! He's a very fast shipper with very reasonable shipping rates (unlike Aircraft Spruce).
 

Robin Soller

Member
Joined
Jan 16, 2005
Messages
21
Reaction score
0
Due to increases in carbon fiber in the industry, our HUGE sale prices on 1.5" Carbon fiber sleeves will end on Friday 1/28/04!
If you want HUGE discounted sleeving, buy while the sale is still on!

Also note that our "buy at the 30ft price" (for Rockety Forum members) sale ends on Moday 1/31.

Please contact us with any questions!

Thank you,

Jon Soller
Owner
Soller Composites
www.sollercomposites.com
603 744 8955
 

Robin Soller

Member
Joined
Jan 16, 2005
Messages
21
Reaction score
0
We were told next week, but the ship date has already slipped from last week to next week, for the order (that was placed in November).

FYI...Large carbon fiber orders are becomming much harder to get a reasonable rates and shipped without delays, due to large Gov purchases eating up much of the available supply.

We are fully stocked in all other fabrics Plain, Harness-Satin H5 & H8, Yellow, Orange, Blue, Silver, Kevlar, UNI-Directional Tape 4.0oz & 9.0oz and of course Sleeves in Carbon Fiber, Fiberglass, Kevlar & Hybrid.

Thanks,

Jon Soller
Owner
Soller Composites
www.sollercomposites.com
603 744 8955
 
Top