scottluther1369
Well-Known Member
- Joined
- Nov 25, 2004
- Messages
- 110
- Reaction score
- 0
Hi,
I'm scratch building a kit and I'm trying to decypher a RockSim File.
Where should I order custom parts such as:
Centering RingOD 2.5888 In, ID 0.9990 In, Len 0.125 In 1/8" Aircraft APlywood Qty 2-4
Parachute 8 Sided shape Dia 28.506 Spill hole 0.0 in
Bulkhead - Aircraft plywood (Birch) BulkheadOD 2.588 in, Len 0.125
EyeBolt - Public Missles -HDWE-EYE-1/8 1/8X24 Steel
Engine Block - Apogee - 13031 - CR 18-24 ring Material; Paper - Engine BlockOD 0.950in., Len 0.250"
There was also a lot of estes parts. Is there a place where I can send a Rocksim file and have them send me specified parts?
Also listed is a Foiled lined 24mm motor mount tube Est 3086 (Estes). I didn't know they made foild mounted tubes.
Also the place I need the nose cone is out of them I need a:
Custom Polystyrene PS Nose Shape Ogive, Len 10.5in, Dia 2.6 In, Wall thinkness 0.020 In Body insert OD:2.540In Len 1.250 In, CG 7.538In Mass 24.702g.
Is In = inches?
It would be nice if there was a one stop shopping for parts. : )
I also need custom cutting of the body tube to accomidate the fins. I have not had much luck contacting parts company. It's what you see is what you get and I need help translating what parts can be substituted and still have equal strength and weight.
Thanks!
--Scott (the newbie)
I'm scratch building a kit and I'm trying to decypher a RockSim File.
Where should I order custom parts such as:
Centering RingOD 2.5888 In, ID 0.9990 In, Len 0.125 In 1/8" Aircraft APlywood Qty 2-4
Parachute 8 Sided shape Dia 28.506 Spill hole 0.0 in
Bulkhead - Aircraft plywood (Birch) BulkheadOD 2.588 in, Len 0.125
EyeBolt - Public Missles -HDWE-EYE-1/8 1/8X24 Steel
Engine Block - Apogee - 13031 - CR 18-24 ring Material; Paper - Engine BlockOD 0.950in., Len 0.250"
There was also a lot of estes parts. Is there a place where I can send a Rocksim file and have them send me specified parts?
Also listed is a Foiled lined 24mm motor mount tube Est 3086 (Estes). I didn't know they made foild mounted tubes.
Also the place I need the nose cone is out of them I need a:
Custom Polystyrene PS Nose Shape Ogive, Len 10.5in, Dia 2.6 In, Wall thinkness 0.020 In Body insert OD:2.540In Len 1.250 In, CG 7.538In Mass 24.702g.
Is In = inches?
It would be nice if there was a one stop shopping for parts. : )
I also need custom cutting of the body tube to accomidate the fins. I have not had much luck contacting parts company. It's what you see is what you get and I need help translating what parts can be substituted and still have equal strength and weight.
Thanks!
--Scott (the newbie)