Composites! Kevlar, Carbon Fibre, Fiberglass. Milled & Chopped

Help Support The Rocketry Forum:

Rob702Martinez

Zip-Tie Oversight Committee
TRF Supporter
I will be supplying and making composite items. As of now I have Milled and Chopped fibers, but will expand to cloth, plate, epoxy etc.

Click to see or discuss the current materials and future items. ------------>http://www.rocketryforum.com/showthread.php?135246-Milled-Carbon-Fiber-chopped-carbon-and-kevlar

** Please post your order in the thread, you can call me or text me 702-503-5194, or PM as needed.

**

If there isn't enough stock to fill your complete order, I will reserve your total requested order, to be filled on the next monthly shipment if you would like.

**Paypal is uroborosdir@gmail.com

**Shipping is 7$USPS First Class w/Tracking in USA. PM me for international rates and quantities. **Each order comes with ONE 30cc Syringe. All measurements are by weight, keep in mind materials are extremely high volume, low mass. A little goes a long way. Thank you! ***************************** 30cc Catheter tip syringe, offset. Can cut or angle tip as needed. Current Stock: 21$1.35 Each

*************

1/32 Milled Fiberglass. Virgin S glass tow. Mix with epoxy/resin/CA.
2oz in a 4oz Jar.

Current Stock: 4 Jars

$5.50 Each. *************** Milled Kevlar(R) which has the texture almost like recycled paper. Virgin 12K Kevlar tow chopped and milled with no binder. Mixes very well with epoxy/resin/CA. It breaks up and suspends in the matrix. Also can mix with a few drops of acetone or alcohol to suspend and add to epoxy/resin. .3oz in a 12oz jar Current Stock: 7 Jars$9.50 Each.

*************

1/8in. chopped carbon fibre. Virgin 6-12k tow with a polymer binder on one side and cut. Mix with epoxy/resin/CA.
1oz in a 4oz Jar.

Current Stock: 7 Jars

$9.50 Each. ************ 1/4in. Chopped Carbon Fibre. Virgin 6-12k tow with a polymer binder on one side and cut. Mix with epoxy/resin/CA 2oz in a 12oz Jar. Current Stock: 4 Jars$9.50 Each.

*************

Milled Carbon Fibre. Absolute virgin carbon fibre tow with no binder, chopped then milled. This is NOT made from scrap, bound tow, cured sheet, recycled parts or trimmings. Mix with epoxy/resin/CA
1.25oz in a 4oz Jar.

Current Stock: 79 Jars.

\$9.50 Each.

***********

Last edited:

FMarvinS

Well-Known Member
I'd like to order 1 jar of milled fiber glass & 2 jars of the 1/4 inch chopped CF. Please PM with further transaction details.

Thanks,
Fred

Rob702Martinez

Zip-Tie Oversight Committee
TRF Supporter
I'd like to order 1 jar of milled fiber glass & 2 jars of the 1/4 inch chopped CF. Please PM with further transaction details.

Thanks,
Fred
Hi Fred, invoice and info PM'd. Thank you!

cbrarick

Wildman CT
I'll take 2 each of the 1/8 and 1/4 chopped CF

Well-Known Member
TRF Supporter
Shoot, looks like the 1/8 CF is gone... I was hoping for that and some Kevlar.

cwbullet

Obsessed with Rocketry
Staff member
Global Mod
If you have any left. I would like a jar of each item and 2 extra syringes.

Rob702Martinez

Zip-Tie Oversight Committee
TRF Supporter
I'll take 2 each of the 1/8 and 1/4 chopped CF
Hi cbrarick, Invoice and info PM'd. Thank you!

Rob702Martinez

Zip-Tie Oversight Committee
TRF Supporter
Shoot, looks like the 1/8 CF is gone... I was hoping for that and some Kevlar.

I have your request on the waiting list. More should be here in 2-3 weeks. I will send you an invoice when the product is ready to ship.

Rob702Martinez

Zip-Tie Oversight Committee
TRF Supporter
If you have any left. I would like a jar of each item and 2 extra syringes.
Hi Chuck,

I have your request on the waiting list. More should be here in 2-3 weeks. I will send you an invoice as soon as it is ready to ship.

Thank you,

Rob702Martinez

Zip-Tie Oversight Committee
TRF Supporter
All Inventory updated, all in stock orders up to now, have an invoice sent.

Waiting list/Future orders updated as well

Thank you,

A Bulk shipment will be here in 2-3 weeks, should be stocked up for a while.

Last edited:

KenRico

'Just the Tip'
Offset syringe really helps up against a fin for internals..even better than the Luer tips

Kenny

cwbullet

Obsessed with Rocketry
Staff member
Global Mod
Who is the manufacturer for that syringe? I have been looking for those for my day job.

Rob702Martinez

Zip-Tie Oversight Committee
TRF Supporter
Who is the manufacturer for that syringe? I have been looking for those for my day job.
Hi Chuck,

I PM'd you all the info about it.

Thank you!

H_Rocket

Death by Powerpoint
Chuck - Owens & Minor can supply those.

Rob702Martinez

Zip-Tie Oversight Committee
TRF Supporter
Hi Fred, invoice and info PM'd. Thank you!
FMarvinS, you are boxed up and ready to go out in the AM. Tracking info to follow. Thank you.

Rob702Martinez

Zip-Tie Oversight Committee
TRF Supporter
Hi cbrarick, Invoice and info PM'd. Thank you!
Cbrarick, you are boxed up and ready to go in the AM. Tracking to follow. Thank you.

TopRamen

SA-5
Sorry I can't get around to using them on rockets just yet, but holy crap do these items ever make epoxys and cloths into things they could never be without them!!!
When my small sample sizes are gone, I too will become a paying or bartering customer!
The milled Carbon is great for coloring the FG layer underneath a layer of CF!!!

It's all put back together now, and it's nice and reassuring to know that the epoxy has the milled products in it, and will likely never fail.

Last edited:

Rob702Martinez

Zip-Tie Oversight Committee
TRF Supporter

I have your request on the waiting list. More should be here in 2-3 weeks. I will send you an invoice when the product is ready to ship.

Thank you

Rob702Martinez

Zip-Tie Oversight Committee
TRF Supporter
Thanks TopRamen! It is good stuff. I have been using the kevlar both milled or chopped or CF Chop mixed with rocketpoxy lately and the results are fantastic.

Last edited:

Salvage-1

Certified
Howdy... That looks like some nice stuff.

I would like 1/8 and 1/4 of chopped CF and 5 syringes pls. Pm me for email address, etc. Thanks

Rob702Martinez

Zip-Tie Oversight Committee
TRF Supporter
Hi Salvage, I sent you a PM. The 1/8th carbon is on order as of Friday . Half of the order got here today so it should be here shortly. I will send you a PM with invoice once it is in my hand. Thank you!

FMarvinS

Well-Known Member
Rob,

The shipment was received in a timely fashion, well packed, and the quantity of carbon & milled fiber glass (2 ounces each) are plenty for multiple applications. I'll be glad to buy more when the current stock dwindles.

Fred
L2, ROSCO
KG4YGP

Well-Known Member
TRF Supporter
Got my Kevlar and milled carbon today, thanks! Fast service and packaged very well. Will gladly buy from again!

Rob702Martinez

Zip-Tie Oversight Committee
TRF Supporter
Hi Chuck,

I have your request on the waiting list. More should be here in 2-3 weeks. I will send you an invoice as soon as it is ready to ship.

Thank you,

Hi CW, order is ready to ship, invoice sent.

Thank you Sir.

Rob702Martinez

Zip-Tie Oversight Committee
TRF Supporter
Howdy... That looks like some nice stuff.

I would like 1/8 and 1/4 of chopped CF and 5 syringes pls. Pm me for email address, etc. Thanks
Hi Salvage, order is ready to ship, invoice sent.

Thank you Sir

Rob702Martinez

Zip-Tie Oversight Committee
TRF Supporter
All Inventory updated. All in stock orders up to now, have an invoice sent.

Paypal terms updated. No more 3%

Waiting list/Future orders updated as well.

Thank you,

Last edited:

Rob702Martinez

Zip-Tie Oversight Committee
TRF Supporter

This monster of an order just left, on its way to Australia!
:boat:

cwbullet

Obsessed with Rocketry
Staff member
Global Mod
That is a monster order.

Thanks

Rob702Martinez

Zip-Tie Oversight Committee
TRF Supporter
That is a monster order.

Thanks

Cwbullet, you are boxed up and on the way to the PO. Tracking info to follow. Thank you.

Staff member