MasonH
Well-Known Member
- Joined
- Aug 20, 2011
- Messages
- 2,335
- Reaction score
- 1
First up are some PML centering rings and bulkheads. They are 98mm diameter with a 38mm hole. I have 5x centering rings, 2x coupler bulkheads, and 2x airframe bulkheads. Everything is quality 3/16" plywood. Id like to get $20 shipped. Gone.
Second are some 7.5" to 98mm centering rings and bulkheads. 4x rings fit into an airframe, and 1x fits into a coupler. 1x bulkhead is sanded for a recovery harness, and 1x is not. Everything is made form 1/2" plywood. Id like $30 shipped. Gone.
Also have some 54mm to 38mm centering rings from Apogee. WIll fit near anything with some sanding. Two in each package. $3 shipped. Gone.
Next are 4x Rocketry Warehouse 54mm 5:1 fiberglass nosecones. Each cone has a hole drilled into the shoulder where I intended for screws to go and hold in a bulkplate. Still perfectly usable. Would prefer $15 plus shipping. Gone.
To go with the nosecones, I have the bulkheads that fit into them. They are 1/2" plywood and have 2x holes where screws (or shear pins) go through to hold it to the cone. I am sure with some sanding they would fit a 54mm coupler just as fine. Free with a nosecone. $1 shipped separately. Gone.
I also have some 1/16" x 1.25" x 9" fiberglass strips. They can still be used as AV Sleds, or something totally different. All up to you. Free with a nosecone. $1 shipped separately. Gone.
Then there are a ton of 38mm motor tubes. 4x of the tubes are 12" long, and 1x tube is 15" long. Each would be fine for a motor mount, fincan, payload bay, etc. All ends are smooth. Make me an offer on these, because I have no idea what it would cost to ship. Low-ballers ignored. Gone.
Lastly,and definitely least, are the 54mm blue tubes. Each tube is 24" long and strong as hell. The bottom 5.5" have 4x 1/8" wide slots. That still leaves you with almost 18" of untouched tube. Perfect for a payload bay, motor tube, or whatever you want them for. If you want, I can cut the tubes to length for you. Make me an offer on these, because I have no idea what it would cost to ship. Low-ballers ignored. Gone.
If you are reading this and are one of the people who ordered a Shoot For The Cure 2.0 rocket, I am sincerely sorry. I did everything I could and got so close, but life really just is hell right now. Grades, cars, extracurricular activities, and just being a teenager have put things on hold lately. I am sorry that these could not get finished, and sorry I couldn't keep the promise I made to you and to myself to follow through.
Second are some 7.5" to 98mm centering rings and bulkheads. 4x rings fit into an airframe, and 1x fits into a coupler. 1x bulkhead is sanded for a recovery harness, and 1x is not. Everything is made form 1/2" plywood. Id like $30 shipped. Gone.
Also have some 54mm to 38mm centering rings from Apogee. WIll fit near anything with some sanding. Two in each package. $3 shipped. Gone.
Next are 4x Rocketry Warehouse 54mm 5:1 fiberglass nosecones. Each cone has a hole drilled into the shoulder where I intended for screws to go and hold in a bulkplate. Still perfectly usable. Would prefer $15 plus shipping. Gone.
To go with the nosecones, I have the bulkheads that fit into them. They are 1/2" plywood and have 2x holes where screws (or shear pins) go through to hold it to the cone. I am sure with some sanding they would fit a 54mm coupler just as fine. Free with a nosecone. $1 shipped separately. Gone.
I also have some 1/16" x 1.25" x 9" fiberglass strips. They can still be used as AV Sleds, or something totally different. All up to you. Free with a nosecone. $1 shipped separately. Gone.
Then there are a ton of 38mm motor tubes. 4x of the tubes are 12" long, and 1x tube is 15" long. Each would be fine for a motor mount, fincan, payload bay, etc. All ends are smooth. Make me an offer on these, because I have no idea what it would cost to ship. Low-ballers ignored. Gone.
Lastly,and definitely least, are the 54mm blue tubes. Each tube is 24" long and strong as hell. The bottom 5.5" have 4x 1/8" wide slots. That still leaves you with almost 18" of untouched tube. Perfect for a payload bay, motor tube, or whatever you want them for. If you want, I can cut the tubes to length for you. Make me an offer on these, because I have no idea what it would cost to ship. Low-ballers ignored. Gone.
If you are reading this and are one of the people who ordered a Shoot For The Cure 2.0 rocket, I am sincerely sorry. I did everything I could and got so close, but life really just is hell right now. Grades, cars, extracurricular activities, and just being a teenager have put things on hold lately. I am sorry that these could not get finished, and sorry I couldn't keep the promise I made to you and to myself to follow through.
Last edited: