Chute shroud lines

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Joshua Westbrook

Frizzlebeard
Joined
Sep 16, 2019
Messages
80
Reaction score
26
Likely a noob question but I gotta ask it.

Why are the shroud lines so short when you order a chute from apogee for example? Is it to reduce drag or save cost?

I re-tied my plastic chutes to longer lines for full effect and better drag. I think they are roughly 24-30 inches of line. I will get photos this weekend when I get home.
 
Here is what Fruity Chutes says, although their is a real parachute, as opposed to what most low power kits contain which is a parasheet (which needs to be pronounced carefully.)

They use 1.15 diameter for each single shroud line

https://fruitychutes.com/help_for_parachutes/how_to_make_a_parachute.htm
Sorry for butting in but there is no such thing as a parasheet. The word parachute is French para=shield + chute=fall. Literally ant object that shields from a fall can be called a parachute.
Many real parachutes can be laid out flat.
 
Here is what Fruity Chutes says, although their is a real parachute, as opposed to what most low power kits contain which is a parasheet (which needs to be pronounced carefully.)

They use 1.15 diameter for each single shroud line

https://fruitychutes.com/help_for_parachutes/how_to_make_a_parachute.htm
Sorry for butting in but there is no such thing as a parasheet. The word parachute is French para=shield + chute=fall. Literally ant object that shields from a fall can be called a parachute.
Many real parachutes can be laid out flat.
 
Sorry for butting in but there is no such thing as a parasheet. The word parachute is French para=shield + chute=fall. Literally ant object that shields from a fall can be called a parachute.
Many real parachutes can be laid out flat.
https://www.rocketreviews.com/parasheet-180703140820.html
https://www.apogeerockets.com/education/downloads/Newsletter183.pdf
https://scottbryce.com/parachute/spherical_parachute.html
https://www.unm.edu/~tbeach/IT145/week05/parts.html
Also Handbook of Model Rocketry , 7th edition, page 181
 
Last edited:
A good rule of thumb for most is the length should be equal to the diameter, but I'm sure if the lines are longer it won't matter much. When I tie my lines on plastic chutes I always make sure the lines doesn't cinch on the plastic chutes because this tends to tear the chute up so I always makes sure that ther is gap between the knot and the chute.
 
The only chutes I've bought are the ones that come with kits. I make all of my larger ones. I use shroud lines 1.5 x the chute diameter. I've found that the longer length reduces the amount of swinging that happens and stabilizes the chute much better. Of course a center spill hole helps that a lot too.
 
Sorry for butting in but there is no such thing as a parasheet. The word parachute is French para=shield + chute=fall. Literally ant object that shields from a fall can be called a parachute.
Many real parachutes can be laid out flat.
A bike helmet. Rubber playground padding. My wrists. A balustrade.
 
Back
Top