Oldschool77
Well-Known Member
- Joined
- Dec 11, 2010
- Messages
- 420
- Reaction score
- 50
99 Chevy blazer. I started a right rear pad replacement which turned into a caliper then master cylinder(I did a bench bleed before install ) replacement. At this point all 4 rims are off. Started the rear bleed process & getting meh out. Helper holding pedal down & roters are turning.
An Internet search brought up that the proportioning valve might be offset, followed instructions and heard a springy pop. Started a std bleed w/the l front, got to the rear and still meh bleed pressure and no rear brakes. I need a Chevy or brakes specialist help.
An Internet search brought up that the proportioning valve might be offset, followed instructions and heard a springy pop. Started a std bleed w/the l front, got to the rear and still meh bleed pressure and no rear brakes. I need a Chevy or brakes specialist help.