Cheap F engine Min Diameter custom.

PDawg

Well-Known Member
Joined
Feb 14, 2022
Messages
183
Reaction score
201
A cheap F engine Minimum Diameter custom. Upper body tube and nosecone are the upper section of a Quest Penetrator kit (29mm), lower section is a 29mm engine/ body tube, engine block/coupler is from ASP Rocketry, fins made from Basswood from Hobby Lobby. Just under 23 inches tall. Paint only needed for black lower section. The Penetrator was built up as a separate shorter rocket using a NC-55 nosecone. 2 nice rockets for well under $20.
 

Attachments

  • IMG_3177.jpg
    IMG_3177.jpg
    49.6 KB · Views: 0
  • IMG_3065.jpg
    IMG_3065.jpg
    74 KB · Views: 0
Top