Quantcast

Ceuntur Vector-V Clone Finished!

The Rocketry Forum

Help Support The Rocketry Forum:

laseradam

Well-Known Member
Joined
Jan 21, 2009
Messages
111
Reaction score
0
Finished the Vector-V. Paint is red, silver, and blue metalic covered directly with future.
 

laseradam

Well-Known Member
Joined
Jan 21, 2009
Messages
111
Reaction score
0
Close-up of the fins. The silver turned out very good.
 

Very nice! I wanna clone one of these to join my other Centuri clones... May I ask where you got the parts?
 

Fishhead

Well-Known Member
Joined
Jan 20, 2009
Messages
3,506
Reaction score
163
Just use an Estes Viking. It has everything you need except for the scrap of BT-55 and the 2055 centering rings. You'll need a transition also, but that isn't that difficult. (Or so I'm told.)
 

gpoehlein

Well-Known Member
Joined
Jan 18, 2009
Messages
3,564
Reaction score
9
What Bill said. I posted a "conversion" sheet over at the Yahoo Old Rockets group:

https://groups.yahoo.com/group/OldRockets?yguid=9744027

If you are not a member, simply join and go into the files section. The conversion tells what you need in addition to the Viking kit, as well as giving the template for the transition.

Good luck on your Vector-V!

Greg
 

Fishhead

Well-Known Member
Joined
Jan 20, 2009
Messages
3,506
Reaction score
163
Originally posted by gpoehlein
What Bill said. I posted a "conversion" sheet over at the Yahoo Old Rockets group:

https://groups.yahoo.com/group/OldRockets?yguid=9744027

If you are not a member, simply join and go into the files section. The conversion tells what you need in addition to the Viking kit, as well as giving the template for the transition.

Good luck on your Vector-V!

Greg
What Greg said, because his plan was what I used. (That's why I had no trouble with the template.) :D
 
Top