Cesaroni Hardware Weight Question

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

stonc024

Member
Joined
Feb 2, 2013
Messages
9
Reaction score
1
Does anyone know where I can find on the Cesaroni site what the weight of the hardware is? Working on level 3 cert and trying to figure out what I need to put as mass override in grams using open rocket for a 98mm 6 grain (non-XL). Any guidance would be appreciated. Thanks for your time.
 
This is the kind of thing u should be discussing with your Tap's.

U do have 2 correct?

not that you can't ask here, but purpose of having TAPS is to guide u on your L-3 journey. :) use them that's what they are for.
 
On the smaller diameters, the hardware weight is in the hardware dimensions drawing. Don’t know about the big stuff.
 
If you look at the 98mm 6 grain reloads they list a motor burn out weight for the different loads in that case.

https://www.pro38.com/products/pro98/motor/MotorData.php?prodid=13766N2500-P
The 98mm 6 grain gen 1 or 2 hardware drawings do not have the weight listed.

You could ask in the CTI discussion thread, look at thrust curve. Open rocket has the motors and hardware in the software and the simulation gives you a decent weight for the rocket with a given motor/hardware.

https://www.rocketryforum.com/threads/cti-discussion-thread.162183/page-6
https://www.thrustcurve.org/
~John
 
Back
Top