3D Printing Call for suggestions

[cwbullet]

I am going to start with a monthly context to create a nose cone and fin can that is not currently. Look for that classic kit and post a link to a photo. We might decide to add it to the monthly design contest.

 

[GlenP]

Nose cone idea: from the Estes Nemesis and Star Rider, it has a canopy and canards.

https://modelrocketbuilding.blogspot.com/2017/07/estes-nemesis-2175-build-part-1-parts.html?m=1
https://www.spacemodeling.org/jimz/est2010.htm

 

[cwbullet]

Nose cone idea: from the Estes Nemesis and Star Rider, it has a canopy and canards.

https://modelrocketbuilding.blogspot.com/2017/07/estes-nemesis-2175-build-part-1-parts.html?m=1
https://www.spacemodeling.org/jimz/est2010.htm

I might even be able to do a fin can. I will look at it.

 

[GlenP]

I might even be able to do a fin can. I will look at it.

Bonus points if anyone can print the nose cone in two colors with the cone white and the canopy black! OK, maybe it could be done in two snap or glue together parts? The fins could possibly be made TTW as a slide in part on the nose, after you put in the clay.

 

[GlenP]

Fin can idea: Starblazer X-20
https://plans.rocketshoppe.com/estes/est1342/est1342.htm

 

[cwbullet]

Bonus points if anyone can print the nose cone in two colors with the cone white and the canopy black! OK, maybe it could be done in two snap or glue together parts? The fins could possibly be made TTW as a slide in part on the nose, after you put in the clay.

That is easily done with the MMU2 from Prusa.