- Joined
- May 31, 2011
- Messages
- 333
- Reaction score
- 132
This project is a tubing coupler that is designed to hold ejection electronics for your rocket that fits Estes BT-55 tubing.
There are two models 1) coupler, 2) end cap.
The end cap has a hole in the center that is 3.5mm in diameter.
There are two lengths of couplers 1) 60mm (2.36 inches), 2) 120mm (4.72 inches)
https://www.thingiverse.com/thing:5419314
There are two models 1) coupler, 2) end cap.
The end cap has a hole in the center that is 3.5mm in diameter.
There are two lengths of couplers 1) 60mm (2.36 inches), 2) 120mm (4.72 inches)
https://www.thingiverse.com/thing:5419314
