Ryan S.
Well-Known Member
- Joined
- Mar 24, 2003
- Messages
- 3,553
- Reaction score
- 2
Here are some pics of my Blackhawk R&D Sandhawk. I have been working on it for a couple months. It has taken me this long simply because of school and lack of time in general.
The whole thing is glassed. The fins are glassed to the motor mount tube and glass wasy laid across the fins down to the body tube to form a fillet. The body tubes are also glassed with one layer of 6oz. I installed copper pipe (4 lengths) into the aft 2 centering rings so in the future the rocket can be staged. If it is staged the timer will be located in the interstage simple because there was no room in the rocket. It is set up for dual deployment.
here is a pic of one of the fins glassed to the MMT
The whole thing is glassed. The fins are glassed to the motor mount tube and glass wasy laid across the fins down to the body tube to form a fillet. The body tubes are also glassed with one layer of 6oz. I installed copper pipe (4 lengths) into the aft 2 centering rings so in the future the rocket can be staged. If it is staged the timer will be located in the interstage simple because there was no room in the rocket. It is set up for dual deployment.
here is a pic of one of the fins glassed to the MMT