blackjack2564
Crazy Jim's Gone Banana's
Couldn't get to rockets to show the tracker and NC assembled today.
The following pics just to show varying clearances of parts.
Had to file a very small amount of plastic off the Battery clip to get it in the tube.
The whole thing held together by pulling the shock cord tight then clamping it on the outside of coupler bp. Only thing I have not figured out is the clamping part. I could just wrap it around a screw and washer, then screw down tight. But holding out for a better solution.
Have had all hooked up and running. Set on tree limb and got a good signal from 1 mile away, so I know it will work. Figured to paint the tube flour. orange to aid in finding it.
Also drilled hole in sled under sensor as it was tight to sled, to allow proper sampling
The following pics just to show varying clearances of parts.
Had to file a very small amount of plastic off the Battery clip to get it in the tube.
The whole thing held together by pulling the shock cord tight then clamping it on the outside of coupler bp. Only thing I have not figured out is the clamping part. I could just wrap it around a screw and washer, then screw down tight. But holding out for a better solution.
Have had all hooked up and running. Set on tree limb and got a good signal from 1 mile away, so I know it will work. Figured to paint the tube flour. orange to aid in finding it.
Also drilled hole in sled under sensor as it was tight to sled, to allow proper sampling