Rocketjunkie
Addicted to APCP
- Joined
- Jan 19, 2009
- Messages
- 5,544
- Reaction score
- 1,938
I've just started construction of a bigger Deuce upscale.
Body diameter is 9", 99" long. Motors are 98 mm with max length 4 grain.
I've reduced the cant angle to 12.3 deg to accommodate the 4 grain motors.
The fins are huge!
This shows the motor mount, both 12.3 and 15 deg cant.
Finally, a sketch of the rear view, showing dimensions.
Body diameter is 9", 99" long. Motors are 98 mm with max length 4 grain.
I've reduced the cant angle to 12.3 deg to accommodate the 4 grain motors.
The fins are huge!
This shows the motor mount, both 12.3 and 15 deg cant.
Finally, a sketch of the rear view, showing dimensions.