frognbuff2.0
Aggressor Aerospace affiliate
I suppose I should have created this thread earlier and should have taken (a LOT) more pictures along the way, but I've been working on an Atlas V 541 model at 1:81.5 scale with the markings for the upcoming Mars 2020 mission for over a month now. It's all but done, once the semigloss has dried I only have to attach the SRBs to the core booster.
The canted ogives for the solids were 3D-printed and the model can be flown in a 531 configuration with a detachable fin unit I made for it. It can be flown with two 18mm and three 13mm motors, which if I muster the courage to risk this thing will likely be Estes A10-3T's and Quest/Aerotech C12-4s.
The canted ogives for the solids were 3D-printed and the model can be flown in a 531 configuration with a detachable fin unit I made for it. It can be flown with two 18mm and three 13mm motors, which if I muster the courage to risk this thing will likely be Estes A10-3T's and Quest/Aerotech C12-4s.
Attachments
Last edited: