rocketkid88
Well-Known Member
- Joined
- Sep 22, 2009
- Messages
- 412
- Reaction score
- 0
Well, a while ago (b4 i found this forum and learned allot about MPR) i built a rocket (24mm mount) and all. i put this skimpy little shock cord in it, which I wouldnt' even trust most of my lpr with. I tried launching the thing on an E9 (it really needs more motor than that, but..) any way it suffered a messed up 'cute (24" estes piece o plastik, what can you ask?) but was still OK. now i want to try an AT motor or something (mabye a D12 would be able to kick it up there a few hundred ft.. Im not sure tho) but there is no way i'm launching it with this junky shock cord. How do you think is the best way to attach TN to an already built rocket? if i was building it again Id go with Kevlar from the mmt, but there's no way i could get down there so i don't see y bother with the Kevlar.
Maybe i could just put two slits in the bt and run the TN out the upper one and back in the lower one, with a knot on the end. that would be a bit ugly tho..
what are your opinions? thanx, Nate
pix: static
launch on E9
Maybe i could just put two slits in the bt and run the TN out the upper one and back in the lower one, with a knot on the end. that would be a bit ugly tho..
what are your opinions? thanx, Nate
pix: static
launch on E9