• If you have bought, sold or gained information from our Classifieds, please donate to Rocketry Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Wanted AT 38/1080 casing, AT 54/2560 casing, small fiberglass bits

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

StuartL_UK

Active Member
Joined
Aug 29, 2017
Messages
37
Reaction score
10
Location
UK
I'm looking for a few bits to assist with a current build. All will need to be shipped to Florida; I cannot collect as I'm using a freight forwarder to the UK.

Specifically I'm looking for used/secondhand/offcuts of:
  • Aerotech 38/1080 and/or 54/2560 casings. No closures needed, but I wouldn't mind another set of 54 closures/FSD if you have spares :D
  • Fiberglass or carbon fibre 38mm motor mount tube.
  • Centering rings (or offcuts of FG sheet to make some) to suit 38mm in Wildman 2.6" tube. Happy to cut down larger centering rings.
  • Wildman 2.6 tube extension (i.e. a coupler and/or an offcut of 2.6" tube).
  • Nose cone to fit Composite Warehouse 54mm FG tube.
 
Back
Top