I have attached a drawing of my typical assembly where the electronics are in the nosecone. Basically, you will proceed as standard, but when you are ready to attach your recovery system to the nose, keep the section of shock cord that will go to the chute either short or Z-folded and bound up with the chute bundle itself. I would suggest having about 8-12" there. You can go more if you'd like, but then the e-match wires start to get long. When you fold up your chute, simply wrap the Cable Cutter around it, and then secure the e-match wires to the section of shock cord with some tape to keep them from flailing about. Remember to add just a little bit of slack though - you want the tension on the shock cord, not the wires.