ChrisAttebery
Well-Known Member
- Joined
- Feb 15, 2014
- Messages
- 2,454
- Reaction score
- 80
We're starting off 2017 with a new product. We now have an altimeter/tracker bay available for 29mm filament wound nose cones.
They are $25 plus shipping and available immediately.
APE 29mm Head End Altimeter Bay
Our head end deployment altimeter/tracker bay for 29mm filament wound nose cones. Accommodates altimeters up to 2.5" long. The bay is secured to the nose cone with a countersunk screw through the shoulder.
Fits all 29mm nose cones with shoulders that have a 1.000" or smaller ID.
This kit includes all of the necessary hardware:
CNC cut black G10 bulkhead.
CNC cut and slotted 3/8" plywood shoulder.
CNC cut 1/8" plywood tray.
#6 x 3/8" flat head wood screw.
6" x 1/8" braided Kevlar.
You need to provide the nose cone, altimeter, switch, battery, wiring harness, epoxy and a Phillips screwdriver. A hand drill, 1/8" drill bit and countersink are needed for installation.
They are $25 plus shipping and available immediately.
APE 29mm Head End Altimeter Bay
Our head end deployment altimeter/tracker bay for 29mm filament wound nose cones. Accommodates altimeters up to 2.5" long. The bay is secured to the nose cone with a countersunk screw through the shoulder.
Fits all 29mm nose cones with shoulders that have a 1.000" or smaller ID.
This kit includes all of the necessary hardware:
CNC cut black G10 bulkhead.
CNC cut and slotted 3/8" plywood shoulder.
CNC cut 1/8" plywood tray.
#6 x 3/8" flat head wood screw.
6" x 1/8" braided Kevlar.
You need to provide the nose cone, altimeter, switch, battery, wiring harness, epoxy and a Phillips screwdriver. A hand drill, 1/8" drill bit and countersink are needed for installation.
