Gillard
Well-Known Member
- Joined
- Jan 18, 2009
- Messages
- 1,973
- Reaction score
- 3
I need some help with a project.
i want to do a simple cluster using low/mid power AP RMS motors.
i've done several BP clusters and never had a major problem, occasionally one motor might not ignite.
here's my problem, when i ignite aerotech RMS motors there ia a greater time lag between pressing the button and lift off than with BP, and this time lag differs quite a bit.
i use a 12v battery, freshly charged etc. the igniters i use are the supplied copperheads.
how can be sure that both motors in an AP cluster will ignite?
I'm in the UK and my choice of igniters is limited.
Any suggestions?
i want to do a simple cluster using low/mid power AP RMS motors.
i've done several BP clusters and never had a major problem, occasionally one motor might not ignite.
here's my problem, when i ignite aerotech RMS motors there ia a greater time lag between pressing the button and lift off than with BP, and this time lag differs quite a bit.
i use a 12v battery, freshly charged etc. the igniters i use are the supplied copperheads.
how can be sure that both motors in an AP cluster will ignite?
I'm in the UK and my choice of igniters is limited.
Any suggestions?