Hey TRF, I’d never thought I’d run this machine again, but I am in a pickle and could use your help.
I can make only 38mm, 54mm, 75mm and 98mm. All 57” long except the 38mm at 44” long.
Prices:
98mm- $249
75mm- $235
54mm- $176
38mm- $110
For the additional $50 I can take the tube to a machine shop that has a center-less grinder so that I can get the tube sanded smooth. Also this way I can overshoot on the thickness when winding.
Also and as long as the winding pattern comes out okay, I could wrap the tube with the twill spread tow to give it that awesome look. It would be more off on the OD though as it is hard to nail it when it comes to filament winding.
Please PM if interested
I can make only 38mm, 54mm, 75mm and 98mm. All 57” long except the 38mm at 44” long.
Prices:
98mm- $249
75mm- $235
54mm- $176
38mm- $110
For the additional $50 I can take the tube to a machine shop that has a center-less grinder so that I can get the tube sanded smooth. Also this way I can overshoot on the thickness when winding.
Also and as long as the winding pattern comes out okay, I could wrap the tube with the twill spread tow to give it that awesome look. It would be more off on the OD though as it is hard to nail it when it comes to filament winding.
Please PM if interested
Last edited:
