Hello TRF, I want to make a big leap on making my signature line of tubing and most especially fin plates in using the cool looking 2x2 twill spread tow carbon.
My plan is to order this material in pre-preg form, however, it has to be ordered in minimum quantity of at least 10 yards. This will be the reason why the tubes will be solded at a really high price, these will not be cheap tubes due to the cost of the material.
I will be offering them in 54mm, 75mm and 98mm. I can do 38mm, but it might be more difficult for me since it is a smaller diameter. Max length of 60” except for the 38mm as the mandrel is only 54” long, I can only do about 48”.
Plate size will be 11” x 35” x 0.125” as it is the only thing that will fit in my oven.
I will do my best to see about getting these tubes sanded smooth for you, I have found a neat trick in getting them sanded with minimal effort.
Prices will be as followed for 60” long except for 38mm at 48” long and tubes will be sanded smooth.
98mm- $320
75mm- $260
54mm- $220
38mm- $147
I can do thin wall for $20 less
11”x 35” 0.125” plate at $180
Remember that this material is very expensive and I hope you can understand why the pricing is high.
My plan is to order this material in pre-preg form, however, it has to be ordered in minimum quantity of at least 10 yards. This will be the reason why the tubes will be solded at a really high price, these will not be cheap tubes due to the cost of the material.
I will be offering them in 54mm, 75mm and 98mm. I can do 38mm, but it might be more difficult for me since it is a smaller diameter. Max length of 60” except for the 38mm as the mandrel is only 54” long, I can only do about 48”.
Plate size will be 11” x 35” x 0.125” as it is the only thing that will fit in my oven.
I will do my best to see about getting these tubes sanded smooth for you, I have found a neat trick in getting them sanded with minimal effort.
Prices will be as followed for 60” long except for 38mm at 48” long and tubes will be sanded smooth.
98mm- $320
75mm- $260
54mm- $220
38mm- $147
I can do thin wall for $20 less
11”x 35” 0.125” plate at $180
Remember that this material is very expensive and I hope you can understand why the pricing is high.
Last edited: