• If you have bought, sold or gained information from our Classifieds, please donate to Rocketry Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Ancient SSRS 134 “Sounding Rocket”

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

J Blatz

Well-Known Member
TRF Supporter
Joined
May 8, 2010
Messages
1,285
Reaction score
261
This here is a very old Small Sounding Rocket System 134 model rocket. From the 80s when flying it might get you booted from the NAR. It’s 1.340“ OD by about 24” long. Complete, but has been started and perhaps not for the best. The 29mm mmt has been glued in and it’s slightly off center. If I was going to build it I’d likely bup enough quest 35mm body tube to replace the original tubes and of course you’d need a little bit of 29mm motor tube. The streamer is dust just so y’all know but the chute is fine.

Old and very unique. Cool decal. 40 bucks shipped us.
 
Townes said “pick it…and it won’t never heal”. People nowadays say “pics or it didn’t happen”. So here you go.
 

Attachments

  • E997BE1B-2EC7-40A1-ACF4-E4097E34078E.jpeg
    E997BE1B-2EC7-40A1-ACF4-E4097E34078E.jpeg
    2.8 MB · Views: 1
  • BD854C29-5DBC-476C-9FDE-4B4138A39FAC.jpeg
    BD854C29-5DBC-476C-9FDE-4B4138A39FAC.jpeg
    994.3 KB · Views: 1
  • 28A02FFC-101F-454D-9456-1D049C7221FB.jpeg
    28A02FFC-101F-454D-9456-1D049C7221FB.jpeg
    1.8 MB · Views: 1
If it wasn't started already and poorly as you say I would have bought it already
 
sorry al, someone beat you to it.
Ah, no worries.... did not see it when you posted it earlier. My brother had one back in the day ( lost at LDRS-6 ). Would have been a neat gift for him :) .
Thanks again.
 
This here is a very old Small Sounding Rocket System 134 model rocket. From the 80s when flying it might get you booted from the NAR. It’s 1.340“ OD by about 24” long. Complete, but has been started and perhaps not for the best. The 29mm mmt has been glued in and it’s slightly off center. If I was going to build it I’d likely bup enough quest 35mm body tube to replace the original tubes and of course you’d need a little bit of 29mm motor tube. The streamer is dust just so y’all know but the chute is fine.

Old and very unique. Cool decal. 40 bucks shipped us.

1980's is ancient? I guess that makes me prehistoric? 🦎🐊
 
Back
Top