Aerotech - Phoenix (#91010) Gallery

Discussion in 'Aerotech Consumer Aerospace (AT)' started by JAL3, Feb 7, 2009.

Help Support The Rocketry Forum by donating:

  1. Feb 7, 2009 #1

    JAL3

    JAL3

    JAL3

    Well-Known Member

    Joined:
    Jan 18, 2009
    Messages:
    13,204
    Likes Received:
    15
    Welcome to the Aerotech Phoenix (#91010) Gallery on TRF.

    This gallery showcases the Aerotech Phoenix (#91010) and those rockets derived from it. Particularly appropriate in this thread are the following:


    Aerotech: Phoenix: #91010



    as well as any upscales, downscales, clones, kitbashes or other derivative works. Even Goonies qualify!



     
    Last edited: Mar 11, 2013
  2. Feb 7, 2009 #2

    JAL3

    JAL3

    JAL3

    Well-Known Member

    Joined:
    Jan 18, 2009
    Messages:
    13,204
    Likes Received:
    15
    Aerotech Phoenix (#91010) Basic Information.

    [​IMG] Aerotech Consumer Aerospace (AT)

    MODEL NAME: Phoenix Also known as:

    NUMBER: #91010

    Introduced: 1991
    Final Year:
    Designer: Bob Sanford

    Type: Rocket Glider
    Motor Mount: 1x32mm
    Recovery: Glide
    Stages: 1
    Length:
    Diameter:
    Span: 50"
    Weight: 25 oz

    Mfg. Description: PHOENIX is a high performance, rocket launched, fully aerobatic glider. An AEROTECH Reloadable Motor System (RMS) rocket motor provides a low cost, high speed launch to 1,000 feet (300 meters) in altitude. PHOENIX's launch is smooth and precise, transitioning to graceful aerobatics during the glide. The PHOENIX pilot uses aileron, elevator and rudder controls for fully aerobatic performance. PHOENIX is intended for the experienced R/C pilot looking for new excitement in the hobby. R/C pilots will enjoy a high L/D and a large speed range during glide. With a balsa sheet/foam core wing and light weight design, PHOENIX is strong enough for all normal flight loads while being light enough for good performance. Special attention has been given to preventing control surface flutter.

    Each PHOENIX comes with a reusable AEROTECH RMS-RC 32/60-100 motor, designed especially for rocket gliders. Simply install an inexpensive propellant module and the PHOENIX is ready for flight! (Aerotech 1992 Catalog)


    Advertising Liveries

    [​IMG] 1992 Catalog


    Face Card(s)



    Instruction Header(s)





    First post in this thread featuring this rocket.

    See Also:
    TRF Build Threads

    TRF Applicable Threads

    LINKS
    EMRR
    RocketReviews
    Mfg. Page


    If you have any additional information on this rocket and/or catalog photos please let us know.
     
    Last edited: Mar 11, 2013

Share This Page