Quantcast

Aerogloss Balsa Sealer no longer?

The Rocketry Forum

Help Support The Rocketry Forum:

SCIGS30

Well-Known Member
Joined
Jan 18, 2009
Messages
1,777
Reaction score
62
I have noticed my local hobby store no longer sells Aerogloss products, they tell me it has been discontinued. I also noticed on Tower Hobbies website that it is also discontinued. I cannot find it on Midwest products website but I did see it in their catalog. I have an email into Midwest and will let you know what I find out. This has been the best product I have ever used and it will be a bummer if it is no longer being made. I tried Sig Balsa sealer before and it was a pain to sand. I wonder if Brodak balsa sealer is any better. I will keep you updated. If anyone has tried Brodak sealer let me know, I don't want to order a can of it if it is no good
 

watheyak

Barnstormer
Joined
May 11, 2009
Messages
795
Reaction score
287
Location
Arizona
In the past few years I have had luck at local hobby shops sifting through their odds and ends of the stuff. I just recently found a hobby shop that still had some and bought all the sanding sealer and balsa filler they had. You might be able to find the same.
 

jadebox

Roger Smith
TRF Sponsor
Joined
Jan 18, 2009
Messages
5,671
Reaction score
196
Midwest appears to manufacturer it in large batches once every year or two. Our distributor will run out, then a few months later we'll be able to get it again.

We have a few one-ounce bottles still in stock. But, we are out of the four-ounce ones as is our distributor.

-- Roger
 
Last edited:

bob jablonski

Well-Known Member
Joined
Jan 30, 2009
Messages
1,744
Reaction score
0
midwest discontinued color dope and my understanding is this is the end of sanding sealer. when my stock is gone all I will only have Sig. good but not quite as good.
 

Latest posts

Top