- Joined
- Feb 3, 2012
- Messages
- 6,346
- Reaction score
- 5,557
It has come to our attention that when using a very skinny screwdriver such as a #0 Phillips to activate the Eggtimer Apogee's integral screw switch it is possible to miss the center of the switch and possibly short the screw against other components on the board. The #4 screws are designed for a #2 Phillips screwdriver, so we recommend that you use ONLY a #2 Phillips screwdriver for the Apogee's screw switch, particularly if you have it mounted in an Easy Mount or other installations where there may be significant distance between the screw and the outside of your rocket.
Cris Erving, Eggtimer Rocketry
Cris Erving, Eggtimer Rocketry