Neil
Well-Known Member
- Joined
- May 10, 2011
- Messages
- 2,832
- Reaction score
- 1
Howbout this for a kit??? a 2" pre-glassed mailing tube, 38MM motor mount (possible with adaptors included. Since the smallest motor is an AT E something, it would have to include a 38-29 and a 29-24.), Basswood or Birch nose cone (you know who will be making these), braided (by me) kevlar shock cord, 25" (I am about to release a 25" version of my Nylon Chutes) ripstop nylon chute, and maybe even decals. Well, maybe not decals. Let me know if you want them, and I might include them, but I usually just chuck them myself. I dont know about you. I am thinking about $30 for this, depending on the cost of the nose cone, which is pretty much the only expensive thing in the kit besides the glassing. If you ask me, $30 for a pre-glassed kit is pretty good, I would certainly buy one if someone else was offering it, not me! Oh. I forgot to mention the fins. Birch plywood, and the tube will be slotted for 4 fins. Howzat sound? Hopefully better than that last idea I had... That got NAILED. Ill include a SpaceCAD file, and if you dont have SpaceCAD, please take the time to get the Demo Version so you can give me some feeback. I will also include a picture of it. I will also have the option for a payload bay (either 12 or 24 inches. You tell me what is the best idea), but it will not have one stock. The extra payload bay would be glassed, and cost about $10 extra. It would have a screw eye, bulkhead (birch plywood), bit of glassed tube (12 or 24"), and of course a coupler. Thanks for the feeback, guys! -Neil