Additive Aerospace - Projects

Discussion in 'Vendor Display' started by Landru, Jan 4, 2019.

Help Support The Rocketry Forum by donating:

  1. Jan 4, 2019 #1

    Landru

    Landru

    Landru

    Additive Aerospace

    Joined:
    Nov 21, 2011
    Messages:
    328
    Likes Received:
    12
    If you use any additive Aerospace products for your rockets, post your project photos/video and info to this thread, or to the Facebook page, and be entered to win a $20 credit at the end of the month!

    Show off what you've been flying!
     
  2. Jan 6, 2019 #2

    mikec

    mikec

    mikec

    Well-Known Member

    Joined:
    May 9, 2009
    Messages:
    1,877
    Likes Received:
    53
    Sorry to contaminate this thread (I've flown plenty of Additive camera shrouds, they're great) but a request: a revision to the 54mm Smart Sled to fit a MARSA33LHD and a Gyro1 tilt module would be well-received, given the number of these units that were sold recently.
     
    Syclone and JDcluster like this.
  3. Jan 7, 2019 #3

    Buckeye

    Buckeye

    Buckeye

    Well-Known Member

    Joined:
    Sep 6, 2009
    Messages:
    2,013
    Likes Received:
    76
    You may be hard pressed to fit all that MARSA stuff on the 54 sled. That is why I shied away from them. Those electronics are just too big for my builds.
     
  4. Jan 7, 2019 #4

    mikec

    mikec

    mikec

    Well-Known Member

    Joined:
    May 9, 2009
    Messages:
    1,877
    Likes Received:
    53
    I think you'l find that the 33 will fit, it's only slightly larger than a Missileworks RRC3.
     
  5. Jan 7, 2019 #5

    Landru

    Landru

    Landru

    Additive Aerospace

    Joined:
    Nov 21, 2011
    Messages:
    328
    Likes Received:
    12
    Have you tried to fit a Marsa 33 on the 54mm? The holes look like they line up pretty well from what I can see online.

    Not sure about the gyro unit, as the hole pattern is not posted. Someone have the mounting specs for that?
     
  6. Jan 7, 2019 #6

    mikec

    mikec

    mikec

    Well-Known Member

    Joined:
    May 9, 2009
    Messages:
    1,877
    Likes Received:
    53
    According to one post, the gyro board is 1x2 inches, not sure about the hole pattern.
     
  7. Jan 7, 2019 #7

    Ethan

    Ethan

    Ethan

    Well-Known Member

    Joined:
    Jan 28, 2009
    Messages:
    283
    Likes Received:
    2
    0.8 x 1.6" #4 hole pattern
     
    Last edited: Jan 7, 2019
  8. Jan 7, 2019 #8

    Landru

    Landru

    Landru

    Additive Aerospace

    Joined:
    Nov 21, 2011
    Messages:
    328
    Likes Received:
    12
    Looks like the gyro will be too big to fit on the back side of the sled.
     
  9. Jan 7, 2019 #9

    AdAstraPerAspera

    AdAstraPerAspera

    AdAstraPerAspera

    Forum Supporter TRF Supporter

    Joined:
    Mar 15, 2016
    Messages:
    428
    Likes Received:
    11
    Also, even if the MARSA 33 won't fit on the 54mm sled, it will definitely for on the 75mm. Can anyone confirm that the hole pattern is actually there on any of the sleds?
     
  10. Jan 21, 2019 #10

    mikec

    mikec

    mikec

    Well-Known Member

    Joined:
    May 9, 2009
    Messages:
    1,877
    Likes Received:
    53
    Having gotten a Marsa33LHD plus gyro board, you're right that getting it to fit in a 54mm rocket is going to be tough. The connectors are pretty high-profile and there's really not a lot of space in a 54mm rocket. I think it's probably hopeless with the Additive sled, alas.
     
  11. Jan 30, 2019 #11

    AdAstraPerAspera

    AdAstraPerAspera

    AdAstraPerAspera

    Forum Supporter TRF Supporter

    Joined:
    Mar 15, 2016
    Messages:
    428
    Likes Received:
    11
    The hole pattern is definitely there for the MARSA33 on the 98mm version, for two of them actually. I don't have the smaller sleds handy, and the tilt gadget holes are not there.
     

Share This Page